Click here to read more about the refinishing process itself.

Tubs

The most common reasons to refinish a tub are: outdated colors (avocado, pink, sea foam green to name a few), damage, rust and a dull finish. These are all remedied in just a few hours with our refinishing process. After refinishing, you have a tub with a smooth glossy finish that will stay looking great for years and is easy to maintain.

Typically we can fix:

Outdated colors Chips Cracks Pits Rust Scratches Dull finish

Tile

Tile refinishing is the easiest way to move from a grungy wall to a new one! Using special fillers, we repair cracks and holes. Then we fill any missing grout with material designed specifically for the refinishing process. Finally we prep the surface and apply the topcoat. The complete process yields a moisture proof barrier for years of mold-free use.

We typically can fix:

Outdated colors Chips Cracks Scratches Broken Tiles Missing Grout Lines Dull Finish

Countertops

The kitchen is the gathering place for today's busy families. Countertops have a big impact on the overall appearance and value of your home. The foundation of most countertops is fine; it's just minor surface problems (stains, burns and knife cuts) that makes them look tired and worn.Sometimes the color is dated, really dragging down the room.

These problems just "go away" with our refinishing process. Problem areas are fixed and a completely new, easy to clean, low maintenance, semi-gloss topcoat is applied. The result is a brand-new looking kitchen with attractive, durable counters. Ask about our new "faux" granite topcoat, available in a myriad of popular colors.

Sinks

Refinishing a bathroom sink usually completes the transformation into a showcase bath. Outdated color is a very common reason for refinishing. Chips and dull color are also common. After refinishing, the sink will look as good as new; all imperfections will be remedied and a brilliant, durable finish applied.

Liners

If the walls behind your tile are heavily damaged a tub liner is the logical solution.

Liners are custom-fitted pieces of acrylic that are mounted over your tub and wall. Acrylic is tough and will not chip or crack, is non-porous and will not stain, is UV-stable and will not fade.

Spot Repair

Professional spot repair services are available for fixtures that are chipped or cracked, but do not need complete refinishing. Call or email us for a quote.

Inlays

Is your tub or shower bottom cracked and leaking? You can't just let it go. Water trapped underneath your tub or shower can cause damage to your home and worse, serious health problems. We can custom make a new bottom to fit over the damaged surface.

Our professional and attractive method of permanently fixing broken fiberglass and acrylic tub/shower bottoms is an affordable alternative to total replacement.

The Refinishing Process

The workplace
The refinishing process starts with preparing the workplace. A powerful ventilation system is put into place to vent fumes to the outside. The area surrounding the tub is protected.

Repairs
Any required repairs are made. This includes cracks, dents, scratches and rust.

Preparation
Thorough preparation of the surface is critical to a beautiful and lasting finished product. The surface needs to be prepared so the topcoat will adhere permanently.

Topcoat
Finally the topcoat is applied with a professional spray gun. The skill of our craftsmen mean the resulting finish will be durable, lasting and free of drips or streaks.